1 / 4UV Conveyor Sterilization System
Conveyor UV surface sterilization system for food packaging and product disinfection FSSAI compliant
OZ India UV Conveyor Sterilization System for surface disinfection of food packaging, bottles, caps, and products on a moving belt. FSSAI compliant. CE certified. Adjustable belt speed and UV dose. Ozone India Technology, Greater Noida.
CE & ISO 9001:2015 certified manufacturer · Est. 2014 · 150,000+ installations · Greater Noida, India
Inline UV-C conveyor sterilization for continuous surface disinfection of food packaging, bottles, caps, pouches, fresh produce, and manufactured components. Products pass under high-intensity UV-C lamps on adjustable-speed stainless steel conveyor belt. UV dose controlled by belt speed — slower speed equals higher dose. Tunnel design with reflective interior maximises UV exposure including underside of product. Applications: bottling lines, bakery and confectionery packaging, fresh-cut produce, pharmaceutical blister packs, laboratory consumables. FSSAI compliant for food safety, CE certified. SS304 food-grade construction.
| Belt Width | 200-1000 mm custom |
|---|---|
| Belt Speed | 0.5-5 m/min adjustable VFD |
| UV Wavelength | 254nm germicidal UV-C |
| UV Dose | 10-100 mJ/cm2 speed dependent |
| Chamber | SS304 tunnel with reflective interior |
| Lamp Configuration | Top and side lamps for full coverage |
| Power Supply | 220V AC 50Hz |
| Certification | CE, ISO 9001:2015, FSSAI compliant |
- Inline continuous operation — integrates into existing production line
- Adjustable belt speed — control UV dose to product type
- Top and side UV lamps — full 360 degree surface coverage
- SS304 food-grade construction — GMP compliant
- FSSAI compliant for food and beverage production
- CE certified — meets EU food safety equipment requirements
VIDEOS
See OZ UV Conveyor in Action
INDUSTRY APPLICATIONS
Where OZ UV Conveyor is Used
Related Products
Frequently Asked Questions
Low-pressure mercury UV lamps are rated for 9,000–12,000 operating hours (approximately 1–1.5 years at continuous operation). UV output degrades by 10–15% per year — replace when the UV intensity monitor reads below 70% of the initial calibrated value, or at least every 18 months regardless of intensity reading.
BIS IS 10500:2012 requires E. coli to be not detectable in 100 mL of treated water. A UV dose of ≥25 mJ/cm² reliably achieves this. Ozone India Technology UV systems are designed to deliver ≥40 mJ/cm² at end-of-lamp-life, providing a safety margin for variable water quality conditions.
No. UV disinfection is a purely physical pathogen inactivation process — it does not remove any dissolved or suspended contaminants. Water must be pre-treated to <1 NTU turbidity before UV treatment. For complete water purification including TDS, hardness, and chemical removal, combine UV with RO and/or ozone treatment.
UV systems are sized for specific UVT values. Ozone India Technology systems are standard-rated at ≥85% UVT (typical drinking water after filtration). For low-UVT water (coloured groundwater, post-secondary treated sewage at 60–70% UVT), the system is sized with additional lamp power to compensate. Provide your water's UVT% when requesting a quotation.
Yes. All UV water treatment systems carry CE marking under EU Machinery Directive 2006/42/EC and are manufactured under ISO 9001:2015 QMS. CE documentation supports export to EU, GCC, and other markets requiring CE certification for imported water treatment equipment.
Request Quote or Information
OZ UV Conveyor