1 / 3UV Weather Test Chamber
UV fluorescent weathering test chamber for polymer coating adhesive and plastic UV degradation per ASTM G154 ISO 4892-3
OZ India UV Weather Test Chamber uses fluorescent UV lamps (UVA-340 or UVB-313) with condensation cycles for accelerated weathering of plastics, coatings, adhesives, and inks per ASTM G154 and ISO 4892-3. CE certified. Ozone India Technology, Greater Noida.
CE & ISO 9001:2015 certified manufacturer · Est. 2014 · 150,000+ installations · Greater Noida, India
UV fluorescent weathering test chambers for accelerated photodegradation testing of polymers, coatings, paints, adhesives, inks, and other UV-sensitive materials using fluorescent UV lamps. Two lamp types: UVA-340 simulates sunlight UV for outdoor durability studies; UVB-313 provides accelerated testing for quick screening. Condensation cycle simulates morning dew and rain exposure — moisture and UV combination drives real-world weathering degradation modes. Programmable UV exposure and condensation alternating cycles. Simpler and lower cost than xenon arc chambers — preferred for pass/fail screening, routine QC, and relative comparisons. Per ASTM G154 and ISO 4892-3. CE certified, ISO 9001:2015.
| UV Lamps | UVA-340 or UVB-313 fluorescent |
|---|---|
| Standards | ASTM G154 / ISO 4892-3 |
| UV Irradiance | 0.77 W/m² at 340 nm (UVA-340) |
| Temperature | 40–70°C panel surface temperature |
| Condensation | Condensation cycle at 50°C |
| Chamber Volume | Standard 60 litres custom |
| Lamp Life | 5000 hours UVA-340 |
| Certification | CE, ISO 9001:2015 |
- ASTM G154 and ISO 4892-3 compliant — recognised worldwide for polymer testing
- UVA-340 and UVB-313 lamp options — outdoor simulation or accelerated screening
- Condensation cycle — combined moisture and UV for realistic degradation
- Long lamp life 5000 hours — low consumable cost vs xenon arc
- Simple operation — lower cost entry for UV weathering testing
- CE certified for plastics coatings and adhesives UV QC labs
INDUSTRY APPLICATIONS
Where OZ UV Weather Chamber is Used
Related Products
Frequently Asked Questions
Test chambers are supplied with calibration certificates for the primary measurement parameters (ozone concentration, temperature, humidity) traceable to national standards. The calibration documentation is formatted to support NABL-aligned laboratory accreditation requirements and ISO 17025 quality system audits.
All test chambers carry a 12-month warranty from installation date covering parts and labour. Annual Maintenance Contracts (AMC) covering 2 preventive maintenance visits, calibration, and priority support are available from ₹18,000–45,000/year depending on chamber type and size.
Yes. All Ozone India Technology test chambers include a microprocessor PLC controller with programmable ramp-and-soak temperature/humidity profiles (up to 99 segments). This is required for cyclic ageing tests per IEC 60068-2-14 and similar standards. Data logging to USB/SD card is standard.
Yes. The range covers temperature-only chambers (temperature: -70°C to +180°C), humidity chambers (temperature: 10–85°C; humidity: 20–98% RH), combined environmental chambers (full temperature-humidity cycling), and specialized chambers for salt spray, xenon weathering, ozone ageing, and UV weathering.
Request Quote or Information
OZ UV Weather Chamber