1 / 10UV Municipal Series — 20000 to 200000 LPH
Large-scale municipal UV disinfection 20,000–2,00,000 LPH — amalgam lamp, open channel and closed vessel
UV Municipal Series 20,000–2,00,000 LPH by Ozone India Technology, Greater Noida. High-output amalgam UV lamps in closed-vessel SS316 or open-channel configuration. US EPA UV Guidance Manual compliant. For drinking water plants, STP tertiary, ETP reuse.
CE & ISO 9001:2015 certified manufacturer · Est. 2014 · 150,000+ installations · Greater Noida, India
High-output amalgam UV systems for municipal drinking water, STP tertiary treatment, and large industrial water treatment plants. Available in closed-vessel (pressure pipe) and open-channel configurations. Amalgam lamps deliver 3× higher UV output than standard low-pressure lamps and maintain output across wide water temperature range. Each system CFD-validated for flow uniformity. Complies with US EPA UV Disinfection Guidance Manual (UVDGM) for Cryptosporidium and Giardia control.
| Flow Rate | 20,000 LPH to 2,00,000 LPH |
|---|---|
| UV Lamp Type | Amalgam high-output, 254 nm |
| UV Dose | ≥40 mJ/cm² Cryptosporidium; ≥186 mJ/cm² Adenovirus |
| Configuration | Closed-vessel pressure pipe / Open channel |
| Reactor | SS316L, flanged, PN10/16, Customized |
| Lamps per Unit | 4–32 amalgam lamps |
| UV Monitor | Validated online sensor |
| Lamp Life | 12,000 hours (amalgam) |
| Compliance | US EPA UVDGM, CE, ISO 9001:2015 |
- Amalgam lamps — 3× higher UV output, consistent across 5–40°C water temp
- 20,000–2,00,000 LPH from single skid
- CFD-validated reactor — guaranteed dose uniformity, no short-circuiting
- US EPA UVDGM compliant — Cryptosporidium 3-log, Giardia 3-log
- Open channel option — direct fit in existing STP/ETP channels
- 12,000 hour lamp life — lower annual operating cost
- CE certified, ISO 9001:2015
INDUSTRY APPLICATIONS
Where UV Municipal Series is Used
Related Products
Frequently Asked Questions
Low-pressure mercury UV lamps are rated for 9,000–12,000 operating hours (approximately 1–1.5 years at continuous operation). UV output degrades by 10–15% per year — replace when the UV intensity monitor reads below 70% of the initial calibrated value, or at least every 18 months regardless of intensity reading.
BIS IS 10500:2012 requires E. coli to be not detectable in 100 mL of treated water. A UV dose of ≥25 mJ/cm² reliably achieves this. Ozone India Technology UV systems are designed to deliver ≥40 mJ/cm² at end-of-lamp-life, providing a safety margin for variable water quality conditions.
No. UV disinfection is a purely physical pathogen inactivation process — it does not remove any dissolved or suspended contaminants. Water must be pre-treated to <1 NTU turbidity before UV treatment. For complete water purification including TDS, hardness, and chemical removal, combine UV with RO and/or ozone treatment.
UV systems are sized for specific UVT values. Ozone India Technology systems are standard-rated at ≥85% UVT (typical drinking water after filtration). For low-UVT water (coloured groundwater, post-secondary treated sewage at 60–70% UVT), the system is sized with additional lamp power to compensate. Provide your water's UVT% when requesting a quotation.
Yes. All UV water treatment systems carry CE marking under EU Machinery Directive 2006/42/EC and are manufactured under ISO 9001:2015 QMS. CE documentation supports export to EU, GCC, and other markets requiring CE certification for imported water treatment equipment.
Request Quote or Information
UV Municipal Series